Friday, January 8, 2016

I Like to Look for Rainbows...

This little lovely was just baptized a member of The Church of Jesus Christ of Latter-Day Saints.   I found some adorable printables out there for her special baptism day, but I wanted to make something a little more "her." 




To download these free printables, click {HERE}
All the photos are jpeg and can be printed at your local photo printer. I've included 2 sizes for the guest book, an 11x14 which will be the square 11x11 and an 8x10. It's Great to be Eight!

 If you would like the digital paper that matches, you can find it from Graphics by Nina
Please use these printables for your own personal use.  Please do not share, but feel free to send them to this blog post.  Thank you!

The words from the printable are from a song "When I Am Baptized" by Nita Dale Milner





Saturday, October 3, 2015

October General Conference Printables

Dieter F. Uchtdorf's talk truly resonated with me this morning. When searching for spiritual truth's we need to be careful to not run into the "internet search follies."  We must ask questions such as: "Do I believe in God? Or Is my experience with the Church working for me?  Have I experienced a mighty change of heart?" While searching and working towards spiritual truth's, we can work towards our answers by asking, "Are we making our discipleship too complicated?  and then, "Start where you are." The complete talk will be found HERE when updated on LDS.org.  Until then, you can watch live at www.lds.org  General Conference.



Friday, July 10, 2015

Back to School Teacher Printables!

Last year I helped a friend decorate her classroom.  I had soooooo much fun!  She used bright happy colors and these papers were perfect for her classroom. Feel free to edit for your own classroom. 

So here is what I made..... 

2x4 Labels

10x13 Poster


2x4 Book Plates


2x4 Book Plates

2x4 Labels

8.5x11 Poster

 11x10 Poster




Monday, May 25, 2015

Cheap and Easy Shower Decorations

I LOVE hosting baby and wedding showers, but don't always love the expense that can occur.  I finally came up with a way to have coordinating decorations with very little cost.  

All you need is:
~Coordinating paper
~Matching Paper Straws
~Twine
~Tissue Paper
~A Cutting Machine, or Trimmer and Punches

At most craft stores, on the scrapbook isle, they have the pads of coordinating themed paper.  Most every week, you can find these on sale.  During the Black Friday events, many of these are 50% -60% off.  That's when I stock up.   Normally they cost about $19.99 so $8-$10 is a super deal and well worth it.  Here's one I used recently to make baby shower decorations:


The paper colors and textures are just perfect!






 With many of these packs, the first few pages have bonus cutouts.  This is where you can get really creative with your decorating.  This particular pad had these cute rectangle sayings for a "Project Life" like scrapbook.  I used these instead as decorations:




   


Didn't they turn out sooooo cute.  I used paper straws to make the easels and used the leftovers for my jars. I used these instructions to make the paper straw easels.

Ok, so next, use the papers to create a banner.  You can personalize with letters if you wish, but for a quick and easy decor, just cut them out in the banner shape.  I used a Silhouette cutting machine, but simple triangles are easy to cut with a trimmer. 


With a hole punch and cheap twine...Ta Dah!  A banner!



While you have the Silhouette out, cut a bunch of circles.  If you have another circle punch or cutter, that will work too.  I then sewed a straight stitch through the paper circles.  Hot gluing them on twine will also work. 


Make a few paper balls like this tutorial and hang up!


You will have plenty of paper leftover so feel free to get as creative as you have time for.  It won't cost you any extra money!






Wednesday, June 25, 2014

Patriotic Breakfast

I'm always late when posting my holiday ideas, so I thought I'd share our new 4th of July tradition with you.  

I don't grill, it's too hot to cook indoors - in July - in Texas, and usually we are out running around to some fair, festival or a friends house celebrating, so I rarely get to use the amazing patriotic party ideas found across the internet.  

Last year I was dying to try out my new Silhouette Cutting Machine, so I threw a small patriotic themed breakfast for my family.  Anyone can pull this off with a few pieces of patriotic card stock, a little twine, and of course those fun paper straws. 



The Menu:
Blueberries and Strawberries
Blueberry Muffins
Milk 
Red Punch 

and of course a few little 4th of July trinkets. 

We ate breakfast outside on blankets and my family had a blast. I think I'll surprise them again. 


Monday, June 2, 2014

Rustic - Not Perfect

Flooring Part 5:

All I have left is the finishing touches (corner round and caulking) and then I can call the floor officially done! 



It has been one long month..... After cutting and sanding, we turned our attention to birthday mode.  We had to get our house put together for my daughter's party.... and we needed clean clothes -seriously.  So, in went the washer and dryer and away went the supplies. Well, they were neatly tucked in the dining room. 

The party, by the way, was super fun!  My daughter planned it herself.... a paint war!  And yes, thank goodness we put the flooring on hold. I was kinda freaking out over the cute little red footprints in the kitchen. 

Anyways, after the party, we got to work again. We decided to prime the sub-floors to prevent any mildew that could possibly happen (since it is in the kitchen). I then opted to start working on the cabinets as well.  I had a few helpers... 



Next came the laying. I'm going to be honest. The laying was a little harder than I had thought it would be. The boards weren't super straight and I was having a hard time getting over the fact that there were imperfections. Hence, my husband kept saying, "Rustic, NOT Perfect." 

We used the liquid nails for flooring on the back of each board and then nailed the boards in using a nail gun. 
                            


A week ago we were finally ready to paint.... But, I ran into a snag- again.  As I was trying out a few different methods on the boards where the oven would be, I could not stand the nail holes.  They were rectangular do to the fact we used an all-in-one brad nailer and staple gun.  I thought once it was painted it wouldn't look bad.... nope, those holes were screaming at me.  


So, I filled all the holes (about 1,000) with saw dust mixed with wood glue. Then I had to plastic off the kitchen to sand. Sanding for 5 hours is not for the weak of heart.  I was pretty much dying when I was finished. 
  


After vacuuming and vacuuming AND vacuuming the floors, I decided upon a darker white wash on the boards. I used 5 parts paint to 1 part water.

Well, again... this is what happens when an amateur thinks they can do anything.... my paint strokes were VERY visible. Even with a very careful rolling system, I couldn't get an even look.  So, I did a second coat.  I did cover most of the grain, but I actually love the more solid colored look. 

After 3 more days, 4 loads of laundry at a friends house, and  6 coats of Varathane Floor Finish, I finally finished the floor... AND we can walk on it.  It's not as rustic as I had wanted and still not perfect, but I am super happy with the results.  




Was it worth a month of cooking on a skillet, having piles of dirty laundry in my room, staying up until midnight freaking out I've just wasted my money?... Yep!  I saved a little money, learned a LOT, and have a custom floor. Now, to finish the cabinets...

UPDATE: I completely forgot to mention my total.  I had quite a bit of wood and liquid nails left over and plan on using those for my chicken cook. I did have to buy another gallon of the finishing product.  So.....my total came to $1.30 per square foot.  Not too bad. 








Saturday, May 10, 2014

Sanding - Double Check

Flooring Part 4: 

My hands are still vibrating as I write this... we've been sanding today... all day.  And by we, my sweet husband did most of the work.  Something about having kids playing in the hose with their clothes on and dumping out the dog food took up most of my time... but I did do some... and definitely did quality control (poor husband).

So we used the Dewalt Orbital Sander and it is awesome!  We used a 60 grit paper first to get rid of the print and paint and my major cutting problems and then went over it with a 120 grit to quickly smooth each board out. 

The sanding pretty much corrected any unevenness I had from the cutting.  We also angled the sander to get a slight beveled look on the edges. 


The writing on the boards said that this product (the plywood) was known to cause cancer in the state of California.  Um... kind of freaked me out. So yes, wear your safety protection. I rock this look don't you think?